Free sample for Laundry Bottle Blow Molding Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva
Free sample for Laundry Bottle Blow Molding Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva Detail:
TECHNICAL SPECIFICATION
| Category |
Item | Unit |
1L | 2L |
3L |
5L |
12L |
20L |
30L |
| Basic Specification | Raw Material |
— |
PE/PP/PA/PVC etc | PE/PP/PA/PVC etc | |||||
| Dimension |
m |
2.7×1.6×1.9 |
3.1×2.0×2.0 |
3.2×2.0×2.0 |
3.5×2.1×2.1/3.7×3.0×2.1 | 4.3×3.5×2.2/4.6×4.4×2.2 |
5×5.9×2.35/5×6.5×2.4 |
53×6.4×2.4 |
|
| Total Weight |
T |
2.3Z4.2 |
3.2Z6.5 |
3.4Z6.8 |
4.878.5 |
12/13 |
17/18.5 |
20 |
|
| Extrusion System | Screw motor |
KW |
7.575.5 |
15/7.5 |
18.5/15 |
22/18.5 |
30(37)/22 |
55/37 |
75/55 |
| Diameter of screw |
mm |
55/45 |
65/55 |
70/65 |
80/70 |
90/80 |
100/90 |
110/100 |
|
| Screw L / D ratio |
L/D |
23:1/23:1 |
25:1/23:1 |
23:1/25:1 |
23:1/23:1 |
25:1(28:1)/23:1 |
28:1/28:1 |
28:1/28:1 |
|
| Extruder heating power |
KW |
7 |
15 |
18 |
20 |
23 |
28 |
30 |
|
| Number of heating zones |
pcs |
3 |
3 |
3 |
4 |
5 |
7 |
8 |
|
| Plasticizing capacity |
kg/h |
55 |
70 |
75 |
95 |
120/130 |
160 |
180 |
|
| Die Head | Heating zones |
pcs |
3-5 |
3-7 |
3-7 |
3-9 |
3-12 |
3-11 |
3-5 |
| Heating power |
KW |
1.5-3 |
2-4.5 |
2.5-5 |
3-6 |
5-9.5 |
8-14 |
10-12 |
|
| Number of cavities |
— |
1-4 |
1-6 |
1-6 |
1-7 |
1-10 |
1-5 |
1-2 |
|
| Clamping System | Sliding distance |
mm |
300 |
360/400 |
360/400/450 |
450/550 |
600/650/700/800/850 |
700/800/850 |
800/900 |
| Clamping distance |
mm |
150 |
200 |
200 |
250/200 |
350/250/200 |
350/250 |
400/350 |
|
| Open stroke |
mm |
160-310 |
160-360 |
180-380/160-360 |
230-480/180-380/160-360 | 330-680/250-500/240-440 | 380-730/330-680/300-550 |
420-820/380-730 |
|
| Clamping force |
kn |
50 |
80 |
90 |
100 |
125/180 |
180 |
200 |
|
| Power consumption | Total power |
KW |
14-16/23-25 |
24-26/42-45 |
37-41/48-52 |
44^16/59-63 |
72-78 |
80-110 |
136-140 |
| Air pressure |
MPa |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
|
| Air consumption |
m3/ min |
0.6/0.4 |
0.8/0.4 |
0.8/0.6 |
1 /0.8 |
0.8 |
1 |
1.1 |
|
| Water consumption |
m3/ h |
0.6/1 | 1/1.2 |
1/1.2 |
1.2/1.5 |
1.5 |
2 |
2.2 |
|
TECHNICAL SPECIFICATION
1.The number of die head and the clamping stroke listed in the above are set for standard models. Capacity of products in different sizes made on one machine must be no more than the plus or minus 20% of the recommended one.
2.One machine, used for producing products with sizes in variety and capacity in big difference, can be designed with die heads in odd number. This design makes it possible to serve one machine in a multi-way by shutting down one or more die head. Take machine “TVHD-1L-3″ as an example, three die heads for 180ml bottle and two die heads for 500ml bottle.
3.The above models can all be upgraded into aHybrid Type” , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould.
4.Above data is for reference only. Tonva retain the right to modify mechanical structure. Equipment purchase is subject to contact.
Factory Workshop
Our Service
Reply the request and take action in24 hours.
Blowing mould and injection mould made at TONVA original company.
100% Quality inspection before the shipment.
Auxiliary machine for complete line.
Provide training service in TONVA company or clinet’s factory.
Customized design is available as requirements.
Engineer for overseas installation is available
Provide consultation service in request.
Sample Room
Custormers
Service Marketing Network
Our machine has been serving customers all over the world.
Product detail pictures:
Related Product Guide:
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Free sample for Laundry Bottle Blow Molding Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva , The product will supply to all over the world, such as: San Diego, Puerto Rico, Bulgaria, With the technology as the core, develop and produce high-quality products according to the diverse needs of the market. With this concept,the company will continue to develop products with high added values and continuously improve products,and will provide many customers with the best products and services!
By Martin Tesch from Guatemala - 2017.06.19 13:51
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Tyler Larson from St. Petersburg - 2017.09.28 18:29
Products categories
-
Lowest Price for Plastic Maker Machine - Massi...
-
One of Hottest for Plastic Pipettes Making Mach...
-
Good quality Sanitizer Packing Bottle Machine -...
-
Low MOQ for Multiple Layers Blow Molding Machin...
-
Lowest Price for Baby Carriages Making Machine ...
-
OEM China Bottle Blow Moulding Machine Price -...