OEM Supply Injection Machines Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva

Short Description:

Product Detail

Product Tags

Feedback (2)

Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Tongda Blowing Machine, Car Fuel Tank Blowing Machine, 5l Canister Blowing Machine, We sincerely welcome domestic and overseas retailers who phone calls, letters asking, or to vegetation to negotiate, we will present you good quality goods as well as the most enthusiastic assistance,We glance forward in your check out and your cooperation.

OEM Supply Injection Machines Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva Detail:

TECHNICAL SPECIFICATION

Category / 类别	Item/项目	Unit /单位	1000ML-4	2000ML-3	5L-2	12L-2
Basic Specification 基本规格	Raw Material / 材料	—	PE/PP
	Dimension /机器外形尺寸	m	5.3×3.5×2.4	5.3×3.5×2.4	5.3×4.5×2.4	6.0×3.8×2.4
	Total Weight/机器重量	T	8	12	12	12
	Product Capacity / 产品容量	ml	1000	2000	5000	12000
Extrusion System 挤出系统’	Diameter of screw / 螺杆直径	mm	90/80	90/80	90/80	100/90
	Screw L / D ratio /螺杆长径比	L/D	25:1/23:1	25:1/23:1	25:1/23:1	28:1/25:1
	Number of heating zones / 螺杆加热段数	pcs	5	5	5	7
	Extruder drive power / 螺杆电机功率	KW	30/22	30/22	30/22	45/30
	Plasticizing capacity / HDPE 挤岀量	kg/h	120	120	120	160
Die Head 模头	Heating zones/模头加热段数	pcs	5	7	5	5
	Number of cavities/ 腔数	一	4	3	2	2
	Center distance /模头中心距	mm	150	190	240	280
Clamping System 开合模系统	Clamping distance/合模行程	mm	200	200	250	350
	Sliding distance / 移模行程	mm	700	700	650	800
	Open stroke /开合距离	mm	240-440	240-440	230-480	330-680
	Clamping force / 锁模力	kn	125	125	125	180
	Air pressure /吹气压力	Mpa	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Power consumption 能耗	Air consumption / 耗气量	m³/ min	0.9	0.9	0.9	1
	Cooling water consumption / 用水量	m³ / h	1.5	1.5	1.5	1.8
	Oil Pump power/油泵电机功率	KW	11	15	15	18.5
	Total power /机器总功率	KW	72-78	72-78	72-78	88-113

TECHNICAL SPECIFICATION

1.lt is suitable for producing 1L-12L fuel bottle, lubricating oil bottle, etc.
2.Smooth treatment inside the die head with no dead angle in the curve flow runner gives good effect to smoothness and no lines outside and inside the finished products.
3. The effect of multi-layer co-extrusion, with the option of visible line design in the finished product, ensures uniform thickness in layers and the 入-shaped flow runner design inside die head, with less than two hours of color change, create translucent and straight visible line with even width top and bottom.
4. Machine can be equipped with auto deflashing, take-out units for finished product, conveyors for waste material and finished product, in-mould label and leak tester.
5. This model can be upgraded into Hybrid Type” , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould.

Product detail pictures:

Related Product Guide:

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for OEM Supply Injection Machines Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva , The product will supply to all over the world, such as: Frankfurt, Iran, Seattle, Our team knows well the market demands in different countries, and is capable of supplying suitable quality products and solutions at the best prices to different markets. Our company has already set up a experienced, creative and responsible team to develop clients with the multi-win principle.

Extrusion Blow Molding Making Machine

Full Electrical Bottle Blowing Machine

Jerry Can Blow Machine

Machine For Blowing Water Storage Tank

Mg 880 Blowing Machine

Pallet Molding Machine

Plastic Bottle Blow Molding Machine

Plastic Spray Bottle Blow Molding Machine

Sanitizer Bottle Blowing Machine

Small Bottle Extrusion Blow Moulding Machine

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.